LD Equipment Co.,litd
It is necessary to ensure the safety of quartz stone countertop processing equipment: when installing quartz stone countertop processing equipment, this operation cannot be carried out during thunderstorms, because not only lightning and thunder may cause safety accidents, but also humid air may cause electric shock. So you should choose dry and sunny weather for operation. At the same time, manufacturers of high-quality quartz stone countertop processing equipment also reminded not to install power sockets in particularly humid locations, and operators must know how to install them in accordance with strict safety regulations.
What are the installation points to be observed when installing quartz stone countertop processing equipment?
The power supply voltage and wiring of the quartz stone countertop processing equipment should meet the specifications: in order to ensure the stable operation of the quartz stone countertop processing equipment, it must be provided with a very stable power supply voltage, and the voltage range must meet the specified requirements, otherwise it should be There are professional technical personnel to guide and choose a regulated power supply or take some measures to meet the requirements of use. At the same time, note that the quartz stone countertop processing equipment and the control cabinet must be grounded, and data cables cannot be plugged in with power. Therefore, such illegal operations must be avoided.
The installation of quartz stone countertop processing equipment must be firmly in place: when the specific installation of quartz stone countertop processing equipment is carried out, the relevant screws should be installed in place, but at the same time, it should not be too forceful to avoid slippage. Manufacturers of high-quality and inexpensive quartz stone countertop processing equipment emphasize that especially the position of the tool needs to be carved, so the installation must be firm enough and the tool must be clamped. The sharpness of the tool should be maintained to meet the requirements during use, otherwise it must be timely Replace it to avoid overloading the motor and affecting the effect of engraving due to the lack of sharpness of the knife.
The above are several aspects included in the installation points of quartz stone countertop processing equipment. In addition, professionals should be present to guide when moving the machine. If an abnormal situation is found when installing or using the quartz stone countertop processing equipment, you should troubleshoot according to the operation manual or contact the dealer immediately to solve it. Do not disassemble or assemble without authorization to avoid human damage.
Any there is item you are in need of ,can contact: whatsapp: +8615665742908.
