The difference between water cooling spindle and air cooling spindle
1. Water cooling spindle is water circulation to cool the heat generated for the high-speed rotation of the spindle. This effect will be super due to the temperature of the water will not exceed 40 degreesafter the circulation (common test, but in the summer it is easy for scales to block the pipes. Workers need to change water and clean up usually; cold winter water freezes and freezes the water pipe to affect the cooling of the main shaft. If the main shaft is inadvertently burned, the main shaft is cooled by fans, which will not have the effects of summer and winter.
Water Cooling Spindle
2. Noise: the water-cooled spindle is basically no noise, but the air-cooled spindle is noisy.
3. Service life: water-cooled spindle should pay attention to maintenance, frequent water replacement or use of industrial water cooler. Such a spindle will have a longer service life. Air-cooled spindles use Japanese NSK bearings. Note that the service life will be very long.
Air Cooling Spindle
4. Engraving and cutting performance:Water-cooled spindles are generally used for more engraving. Because the intensity is not required when engraving, it is best to use air-cooled spindles for cutting. The air-cooled spindles have large torque and strong cutting force.
